b"HANDLING & TRACTIONPACKAGES| COVERS & TRANSPORT|WINDSCREENS|BAGS & STORAGE|BUMPERS|TOURING|HANDLEBARS|CUSTOMIZE|PROTECTION |YOUTH|PERFORMANCE|MOUNTAIN|TRACKS|HANDLING & TRACTION|MAINTENANCE|BELTS|OIL & CAREMAXIMIZE STEERING CONTROL MAXIMIZE TRACTION CONTROLThe length of the turning carbide (carbide inserted directly under the steeringThe quantity and types of studs inserted through the track can have several effects. If installed spindle) is the determining factor on steering control. The longer the turningimproperly, track and/or stud damage can result. If the pushing force from an excessive number carbide, the more positive turning becomes. Too few studs with long turningof studs exceeds the ability of the steering to control the force, the effect could be like that in carbides can result in the situation shown in Illustration 1 below. Illustration 2. In this case, the studs tend to push the skis in a straight line. PROCROSS SKIS1 6-in. ski kit (pair)Back end loose. Too much carbide, Includes 4-in. carbide wearbars SLP MOHAWK SKISnot enough steering control.26639-206 BLACK | '12-'23 UNIVERSAL Provides predictable handling and great flotationFront end pushes. Weak steering fromworn wearbars, turning carbides too short Includes handles, saddles and mounting hardwareor overstudding on track. 7-in. ski kit sold in pairs; wearbars sold separately3 Steering control and stud quantity are in7639-093 BLACK | (SAME APPLICATION AS 7639-095) 1 2 3 balance for proper setup. 7639-201 WHITE | (SAME APPLICATION AS 7639-095)SLP WEARBARS (PAIR)T UNE YOUR SL EDS H A NDL ING T O YOUR R IDING S T Y L E G2 PROCLIMB SKIS Sold in pairsDetermining the proper traction and control is simple. Whats your riding style: Are you a conservative trail rider or a performance trail rider? Look at the chart below. Find the line with the horsepower of your sled. Look under your riding7-in. ski kit (pair) 3639-420 4-IN. CARBIDE | FITS SLP SKIScategory. Here you will find the number of studs and the length of the carbide wearbar you should use. This is a baseline3639-421 6-IN. CARBIDE | FITS SLP SKISguide for stud and wearbar selection. See your dealer for specific model applications. Includes 4-in. carbide wearbarsSTUD QUANTITY / INCHES OF TURNING CARBIDE8639-064 BLACK | '12-'23 UNIVERSALSLEDTRAILPERFORMANCE5075 HP48/4 in.48/6 in. 8639-241 HYPER GREEN | (SAME APPLICATION AS 8639-064)75125 HP102/6 in.153/8 in.125150 HP153/8 in.153/10 in.150200 HP153/8 in.153/10 in.FOR STUD PLACEMENT, USE AN ARCTIC CAT-APPROVED STUD TEMPLATE SHOWN ON PAGE 85.Arctic Cat traction products are available in package quantities that will give you the best combinations for 129-in. and 137-in. tracks. N.) DOOLY TWIN CARBIDE WEARBARSRECOMMENDED STUD LENGTH (ITRACK LUGWOODYSPROUTE-10/8 SKIS Great, all-trail performanceHEIGHTSTUD LENGTH 1.0001.075Reduces darting1.2501.3258-in. center width with 10-in. tip (pair) Features two carbide runners1.3521.325Includes 4-in. carbide wearbars1.5001.575Fits '05-'23 Arctic Cat Saddleless Skis1.6001.575Sold individuallyCobra 1.35/1.60 in. tracks have a standard lug height of 1.25/1.50-in in. The overall lug height including the extended towers is7639-032 BLACK | '12-'23 UNIVERSAL1.35 in. Because the towers will flex, Cobra 1.35-in. These Cobra tracks do not use studs longer than their nominal lug height.3639-343 4-IN. | CARBIDE W/ HARDWELDBEST SELLER3639-344 6-IN. | CARBIDE W/ HARDWELDBEST SELLER CAUTIONSTUD PLACEMENT 3639-345 8-IN. | CARBIDE W/ HARDWELDDO NOT use studs that are longer than recommended To protect the tunnel from possible damage from the studs, it is recommended that DO NOT place studs in line with the heat exchanger or tunnel protector strip, and factor in the amount ofTunnel Protector Kit be installed on thosesuspension travel to avoid tunnel damagemodels not so equippedStuds MUST NOT extend more than 3/8 in. beyond the rubber track lugs SLP POWDER PRO SKIS A Short Snowflap is required when installing Verify adequate clearance between the track, tunnel and heat exchanger to avoid serious damage studs on 07-09 F Series; 09 Z1, Z1 Turbo; Exceptional float and control in deep, loose snowConfirm that your machine has adequate tunnel protection before installing studs09-11 Crossfire and CFR Use an Arctic Cat-approved Stud Template shown on page72 Includes handles, saddles and mounting hardware See your dealer for additional information The length of carbide and number of studs must coordinate to result in balanced handling and proper control 7-in. ski kit sold in pairs; wearbars sold separately 7639-095 BLACK | '12-'23 UNIVERSAL80Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. This WARNING applies to all items that can be ordered on this page. Package quantities, specifications and materials may change without notice. For a dealer near you, visit arcticcat.com. 81"